The option to connect the telescope when Stellarium is started should be selected. Give it a convenient name and choose the appropriate kind of telescope you're using. Here you should select the telescope plugin. In Stellarium go to the settings and select plugins. Probably not in newer versions too, but I haven't tested these.Ĭonnect the serial cable to your RS232 port (or USB to RS232 cable) and your handset of your telescope. There is absolutely no need to install any driver when you're using the 12.04 LTS version of Ubuntu. In Ubuntu getting the telescope to work is easier than in Windows. in my case the output is:Ĭrw-rw- 1 root dialout 188, 0 dec 22 23:01 /dev/ttyUSB0 It will show you if ttyUSB0 or ttyS0 is part of dialout. (place this page in your bookmarks, so you can find it again after reboot was complete.)Ĭheck if you're part of dialout with this command after you rebooted your ubuntu:Ĭheck if ttyUSB0 is part of dialout (works only if the cable is connected) Use your linux login name and not your fancy name. In Ubuntu everything works out of the box, after some tweaking of settings.įirst add yourself to the DIALOUT group and reboot to have these rights to take effect. According to its author, it will possibly work with any LX-emulating telescope. It has been used successfully with a Meade ETX-80 and an LX-90.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |